Orcon HRC-300

The HRC 300 Mechanical ventilation heat recovery unit from Orcon is a smart and energy-efficient ventilation unit, with a capacity of 300 m3/h. The HRC 300 is designed to have a very low energy consumption. It also utilizes multiple built-in humidity sensors. With these sensors, the Mechanical ventilation heat recovery unit determines when ventilation is necessary to restore air quality to the desired level. This means that ventilation will not occur when it is not needed, saving you a lot of energy!

High efficiency: The HRC 300 EcoMax has an efficiency of no less than 93.4%. The HRC 300 MaxComfort even boasts an efficiency of 94%! This significantly reduces your heating costs.
Smart sensors: By using one or more humidity sensors, the HRC 300 only ventilates when necessary! This makes the system even more efficient! The system can also be expanded with CO2 sensors and accessories for zone control.
Easy to maintain: The design of the HRC 300 is such that the important components are easy to clean or replace without having to remove the Mechanical ventilation heat recovery unit from the wall!

Variants

At Ventilationland, we offer 2 variants of the Orcon HRC 300:

Orcon HRC 300 EcoMax:
Orcon HRC 300 MaxComfort:

This variant has the additional benefit of a built-in preheater. This ensures that the incoming air has a pleasant temperature in winter!

Are you looking for a ventilation system with the same features but with a larger capacity? Then choose the Orcon HRC 400 or the HRC 500!

Operation and connection

The Orcon HRC 300 comes with a standard (plug type) connector. It is possible to purchase a separate Perilex connector. The ventilation ducts (diameter 150 mm) can be connected to either the side or the top of the Mechanical ventilation heat recovery unit. Therefore, you do not need to purchase a special left or right version! The HRC 300 can also be mounted on the floor or on the wall.

Components and accessories

The Orcon HRC 300 can be further expanded with various components and accessories. This makes your ventilation system even easier to use and more efficient!

Orcon HRC built-in display 15RF
Orcon CO2 built-in control sensor 15RF
Orcon CO2 built-in control sensor 15RF
CO2 duct sensor 100 mm
Zone control
2-Zone set 15RF - HRC 2-zone control set 160mm
Perilex cable with plug for EcoMax
Orcon HRC300/400 Perilex power cable with plug (22915405)
Dry condensate drain
Extra connection flange Ø 150 mm for EcoMax 300 and MaxComfort 300
Base / stand for Orcon EcoMax
Orcon HRC EcoMax/MaxComfort 300/400/500 Mechanical ventilation heat recovery filter set ISO coarse 70% + ePM1 60% (own brand)
Orcon HRC EcoMax/MaxComfort 300/400 Mechanical ventilation heat recovery filter set ISO coarse 65% (own brand)
Orcon HRC 300/400 EcoMax/MaxComfort Mechanical ventilation heat recovery filter set G3 (own brand)
Orcon HRC EcoMax/MaxComfort 300/400 Mechanical ventilation heat recovery filter set ISO coarse 45% (own brand)

Advantages of Ventilationland

When you purchase an Orcon HRC 300 from Ventilationland, you not only choose a quality product but also excellent service and support! Ventilationland offers free expert advice on ventilation systems. Do you have a question about your ventilation system? Feel free to contact our experts! Our website also features numerous blogs, instructional videos, and extensive information about our products!

4 producten