Pay safe and fast with:
The new HRC 500 MaxComfort is the new MVHR unit from Orcon and replaces the HRC BRPH-15. The HRC MaxComfort is up to 60% more energy efficient than its predecessor, with a thermal efficiency of 99.7%! The unit has a maximum flow rate of 500 m³/h at 150Pa and is very quiet. In addition, the Orcon MaxComfort comes with an integrated preheater as standard.
TIP: The MVHR unit can be set to 500m³/h at 200 Pa using the dip switches.
Orcon's MVHR unit is one of the smartest heat recovery units on the market. Thanks to the many integrated sensors, the device measures the living conditions precisely and can anticipate them. This demand-controlled ventilation prevents unnecessary energy consumption. The HRC 500 comes with the following integrated sensors:
Thanks to the built-in sensors, the flow can be balanced with an accuracy of 1%. The sensors also ensure even better regulation in different demand-controlled scenarios such as bypass, frost, shower and cooking programs. In addition, up to 20 additional RF sensors or RF controls can be connected to the unit.
The Orcon 500 MaxComfort MVHR is exceptionally easy to install. The unit is suitable for both left and right assembly by mounting the control, filters and front plate on the other side of the unit. In addition, the ventilation ducts can be connected to either the side and or the top. The device is supplied without plug.
Left and right version
There are two ways of connecting the Orcon HRC MaxComfort. The unit comes in the "left" version by default. The dwelling connections are on the left, and the connections to the outside are on the right. But this can be easily adjusted: if the front and back are detached, the unit can be turned over! For further information, consult the installation manual.
Other properties Orcon HRC 500 Healthline MaxComfort:| Brand | Orcon |
| Category | Heat recovery choice aid |
| GTIN | 8718403863321 |
| Manufacturer's item number | 22000105 |
| Article number | 19220033 |
| Category code | 16 |
| With external humidity (RH) sensor | No |
| With internal humidity (RH) sensor | Yes |
| Suitable for (extra) humidity (RH) sensor | Yes |
| With internal carbon dioxide (CO2) sensor | No |
| Suitable for (extra) carbon dioxide (CO2) sensor | Yes |
| Suitable for central heating boiler connection | No |
| With bypass | Yes |
| With constant pressure control | No |
| With constant volume flow control | Yes |
| Type of frost protection | Other |
| Nominal duct diameter (min) | 180 mm |
| Nominal duct diameter (max) | 180 mm |
| Connections outdoor air side | Insert end |
| Connections residential side | Insert end |
| Residential connection, underside | No |
| Residential connection, left side | Yes |
| Residential connection, right side | Yes |
| Residential connection, top | Yes |
| Roof connection, side | Yes |
| Roof connection, top | Yes |
| Supply filter according to ISO 16890-1:2016 | ISO ePM1 |
| Efficiency supply filter according to ISO 16890-1:2016 | 70 % |
| Exhaust filter according to ISO 16890-1:2016 | ISO Coarse |
| Efficiency exhaust filter according to ISO 16890-1:2016 | 65 % |
| Height | 888 mm |
| Width | 760 mm |
| Depth | 600 mm |
| Degree of protection (IP) | IP31 |
| Weight | 33.8 kg |
| Energy label | A |
| Connection type | connection left right |
| With enthalpy exchanger | No |
| Plug type | Euro plug |
| Heat recovery by | Cross-counter-flow unit |
| Housing material | Plastic |
| Housing material quality | Expanded polypropylene (EPP) |
| Material heat exchanger | Plastic |
| Suitable for wall mounting | Yes |
| Suitable for ceiling mounting | No |
| Suitable for floor mounting | Yes |
| Suitable for mounting in suspended ceiling | No |
| Suitable for mounting in an attic | Yes |
| Left/right orientation reversible | Yes |
| Max. air volume at 50 Pa | 500 m³/h |
| Max. air volume at 100 Pa | 500 m³/h |
| Max. air volume at 150 Pa | 500 m³/h |
| Max. air volume at 200 Pa | 500 m³/h |
| Max. air volume at 250 Pa | 500 m³/h |
| Max. air volume at 300 Pa | 500 m³/h |
| Power consumption at max. air volume at 100 Pa | 185 W |
| Thermal efficiency at 70% air volume at 50 Pa | 91.7 % |
| Type of motor | Electronically commutated (EC) |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Number of phases | 1 |
| Fuse size of the device | 6 A |
| With thermal overload protection | Yes |
| Electrical connection | Connecting cable with plug with protective contact |
| Energy efficiency class according to 1253/2014/EU | A |
| Type of switch | Other |
| With digital display | No |
| With wired control unit | No |
| Suitable for wired control unit | No |
| With wireless remote control | No |
| Suitable for wireless remote control | Yes |
| Supporting protocol for Modbus | Yes |
| Operation by app | No |
| Suitable for zone controller | Yes |
| With zone controller | No |
| With heating element | Yes |
| With volatile organic compound (VOC) sensor | No |
| Suitable for extra VOC sensor | No |
Item number: 19130111
Item number: 19130113
Item number: 20051053
Item number: 75080007
Item number: 72500518
Item number: 19220026
Item number: 19220024
Item number: 19220029
Item number: 19220032
Item number: 19221001
