- 94 items in stock
The new HRC SmartComfort ensures demand-controlled ventilation in two zones based on a CO2 air quality measurement. In the living room and master bedroom, CO2 sensors are placed which communicate wirelessly with the zone valves. As a result, exactly the requested air flow is provided at any time of day. The system is whisper quiet and has a maximum flow rate of 425 m³/h at 200 Pa. The heat is recovered with an efficiency of more than 99% and a built-in pre-heater comes as standard.
Capacity 2-zone system 
The flow rate of 425 m3/h, as stated above, is calculated by taking 70% of the maximum continuous flow rate (the capacity of the MVHR unit at maximum output) of 300 m3/h and multiplying it by 2, for the number of zones the unit can ventilate separately. 300 x 0.7 x 2 = 420 (with margin of ~5 m3/h due to never fully closing the smart valves). Since you are using a night and day zone and generally there is no need to ventilate all rooms continuously throughout the day, the smart MVHR unit can therefore, despite continuously ventilating a maximum of 300 m3/h, be used for houses/premises of which ventilation calculation is a maximum of 425 m3/h.
Installation-friendly
The wireless communication between the sensors, the device, and the valves is a great advantage. As a result, they can also be installed further down the ductwork and without any wires needed to be pulled or connected. In addition, the valves are equipped with fully transparent housings so that the valve position can be easily seen, thus simplifying installation and maintenance. This makes the system very flexible, installation-friendly and easy to use.
The advantages of the new HRC
Just like the HRC EcoMax and MaxComfort, this latest system has the highest thermal efficiency in the market, highest A+ energy label, built-in humidity sensor, low noise level and modulating 100% bypass. Next to that, up to 20 different sensors can be applied, including the CO2 control sensor and CO2 room sensor.
Features
- Includes rim earth plug
- Includes wall bracket
- Standard with humidity sensor
- Suitable for RF and/or wired control
- Suitable for 2 zone control
- Includes pre-heater
Brand | Orcon |
Category | Heat recovery choice aid |
GTIN | 8718403863390 |
Manufacturer's item number | 22001095 |
Article number | 19220070 |
Specifications
Connection diameter | 160 mm |
Connection | Male |
Connection 0-10V | No |
Airflow at 200 Pa | 425 m³/h |
App controllable | No |
Breedte | 600 mm |
Roof connection side | Yes |
Depth | 830 mm |
Digital display | No |
Home automation connection | No |
Wireless control | Yes |
Enthalpy changer | No |
Filter class | Coarse 65% |
Direct current motor | Yes |
Height | 760 mm |
Flow rate high at 200 Pa | 425 m³/h |
Maandactie | No |
Housing material | EPP / PMMA / PP |
With VOC-sensor | No |
With bypass | Yes |
With built-in CO2-sensor | No |
With built-in temperature sensor | Yes |
With heating battery | Yes |
With humidity sensor | Yes |
Mounting for | Wall |
Mounting for | Assembly chair |
Power consumption according to EPN standard | 0.030 |
Thermal efficiency according to EPN standard | 99.3 % |
Plug | Peripheral ground |
Type of speed control | Other |
House connection top | Yes |
House connection bottom | No |
House connection left | Yes |
House connection right | Yes |
Zone control | 2 Zones |