-
In stock
Item number: 19100090
Pay safe and fast with:
Install this low-noise MVHR unit for a constant supply of fresh air with minimal heat loss. The system provides optimal efficient ventilation of a single room and can be placed in any room. It is an easy solution if you want an MVHR system without having to install a whole new duct system in the house. They are therefore very suitable for existing buildings. Only one throughput is needed.
The air intake and exhaust take place in the same pipe and are reversed every 70 seconds. The heat of the polluted, outflowing air is collected in the (ceramic) heat exchanger. Subsequently, the fresh, incoming air is warmed up by this.
This MVHR unit is connected to the mains, just like the switch. With the switch, the unit can be switched on or off and in speed mode I or II. The productivity of the MVHR unit is 20 m3/h in speed I and 30 m3/h in speed II.
We recommend cleaning the filters 1x in 3 months with water. The regenerator should be cleaned 1x per year with a hoover, at the lowest setting. The system is made for continuous use, 365 days a year, 24 hours a day.
| Brand | Europlast |
| Category | Europlast decentralised MVHR |
| GTIN | 4750492023808 |
| Manufacturer's item number | EER125S |
| Article number | 19300181 |
| Air Flow | 30 m³/h |
| Category code | 118 |
| Diameter | 125 |
| Frequency | 50 Hz |
| Front width | 165 mm |
| Front height | 165 mm |
| Sound | 22 dB, 31 dB |
| Built-in | Yes |
| Built-in depth | 300 mm, 555 mm |
| IP protection class | IPX4 |
| Colour | White |
| Housing material | Plastic |
| With movement sensor | No |
| With bypass | No |
| With odour sensor | No |
| With plug | No |
| With timer | No |
| With pull cord | No |
| With delayed start | No |
| With humidity sensor | No |
| Weight | 1.9 kg |
| Switch | Yes |
| Switchable | Yes |
| Cable length | 1.4 meter |
| Rotational speed | 1700 p/m |
| Plug version | Europlug / Earthed plug |
| Power | 1.8-3.4 W |
| Voltage | 230 V |
| Shape | Square |
| Wall mounting | Yes |