BUVA Evolution RF control - 230 Volt

Buva Control - 230 Volt

Wireless control for Buva ventilation system. There is a wireless connection between fan and control. The controller is equipped with a 230V-12V power supply that can be connected to the mains current.

The control makes it possible to control or overrule your Buva ventilator. This can be done by means of clock programmes or temporary adjustments to the settings. If there is a need for extra ventilation during a short period of time, you can, for example, switch on the boost function.

The control can be placed in a wall socket with a minimum build-in depth of 40 mm. It is also possible to place the controller with a surface-mounted housing. This is a good solution when flush mounting is not possible, for instance in an existing situation/renovation.

The following 6 options can be activated on the controller:

See the specifications for each mode in the file under the heading 'documents'. Here you will also find instructions for using the controls (short-press and long-press of the buttons).

Please note! With the Buva control you must order the Buva communication board, so that the control can communicate with the MVHR system.