Why choose the Building Management Automation module for HRUC-E
The HRUC-E always requires a controller. Without a control the unit cannot function!
With this module you can have the ventilation settings of your ventilation unit switched by an external control system such as a building management system or a home automation system. By default, the unit runs in the low ventilation mode, By connecting the terminals of the connector marked with external, the 3 other ventilation positions can be selected.
These modes are: Vacation- or off-mode depending on the position of the jumper on the back side, mode II and mode III.
The remaining operation is the same as that of the "3-event control panel", please consult the unit's operating manual.
The filters must be cleaned or replaced if the red LED lights up continuously. If the LED is flashing, please consult the . After cleaning or replacing the filters, the filter time can be reset by pressing button F for 10 seconds.
This module replaces the "3-position control panel" or "Deluxe digital control panel".