Thermoduct T-piece 90° 300x80 - 165x80 for flat duct
The Thermoduct galvanised horizontal 90 degree T-piece in size 300mm x 80mm is suitable for various applications.
One example: in combination with the flat ventilation duct, it can be used as an above-ground ventilation duct for the extraction of air from an extractor hood or similar. The flat exhaust pipe can also be used for the supply and extraction of air through another ventilation system if desired.
In addition, the galvanised T-piece can be used for embedding in concrete or other mortar, in a wall, floor or ceiling. Combined with the straight galvanised flat duct and various fittings, a ventilation duct can be installed as desired.
The high-quality galvanised steel and thermoduct layer guarantee a long service life and prevents corrosion of the flat duct.
Available in various sizes.
The galvanised horizontal T-piece has a sleeve connection that slips over the duct. No additional fitting is required. Available in other lengths and sizes on request and at an additional cost.
| Brand | Econox |
| Category | Galvanised flat ducts 300 x 80 mm |
| GTIN | 8719544273956 |
| Manufacturer's item number | 10064009 |
| Article number | 10064009 |
