Good points

Ø 180 - 160 mm
Air tightness class 2
Thermal and noise reducing solution
Cost-saving due to short installation time

Thermoduct insulated transition piece with a diameter of 180 mm to 160 mm

This insulated transition piece from Thermoduct features a galvanized metal pipe with an outer jacket made of thermal insulation material with a 13 mm closed cell structure.

The Thermoduct insulated transition piece is particularly suitable for supply and exhaust air connections for example from heat recovery units and air handling systems. The Thermoduct insulated ventilation pipe and fittings are developed and produced by Econox.

Prefab solution

Thermoduct is the prefab solution for installing insulated, low-noise, and energy-efficient ventilation. The Thermoduct transition piece is prefab insulated, which facilitates easier installation. This also results in shorter installation times and is therefore cost-saving.

Reduction of heat loss and no condensation

Thermoduct is an air duct system with a high-quality thermal insulating jacket. The jacket ensures that heat loss is minimized, and due to the dense cell structure of 13 mm, moisture from the air cannot be transferred. Thermoduct regulates temperature differences between indoor and outdoor air, making condensation almost impossible.

Ease of installation

Thermoduct stands for airtight assembly. The Thermoduct products are standardly equipped with sealing rubber and clamping bands, achieving airtightness class D or ATC 2. Thanks to the safe connection with rubber sealing and the convenient vapor-tight clamping bands, no additional sealing is required. Additionally, the inner pipe is galvanized, making it easy to clean.

Noise reduction

Thanks to the acoustic properties of the insulating jacket, sound is reduced in the ventilation pipes, resulting in a low-noise ventilation system. This makes it the solution for installations that meet the strict noise requirements of the Building Decree 2012 (max. 30dB(A)).

Brand	Econox
Category	Thermoduct spiral duct transition pieces
GTIN	8719544262073
Manufacturer's item number	11314020
Article number	11314020

Specifications

Category code	214
Model	Uninsulated duct
Material duct	Steel
Material quality duct	Other
Wall thickness duct	0.5 mm
Production method	Seamless
Pressed	Yes
Outer surface protection	Sendzimir galvanised
Inner surface protection	Sendzimir galvanised
Perforated inner wall	No
Outside colour	Grey
Design form	Centric
Connection type connection 1	Round air duct
Nominal duct diameter, connection 1	180 mm
Connection 1	Insert end
Connection type connection 2	Round air duct
Nominal duct diameter, connection 2	160 mm
Connection 2	Insert end
With pre-mounted seal	Yes
Fitting reducing piece	No
Duct reducing piece	Yes
Length	17 mm
Length of connection 1	35 mm
Working length connection 1	8.5 mm
Length of connection 2	42 mm
Working length connection 2	8.5 mm
Embeddable in concrete	No
Air tightness class according to EN 1751	D
Anti-bacterial treatment	No
Antistatic version	No
Diameter	180 mm
Diameter 2	160 mm
Type of insulation	Thermoduct insulated 13mm