Good points

Ø 200 - 125 mm
Air tightness class 2
Thermal and noise reducing solution
Cost-saving due to short installation time

Thermoduct insulated reducer with a diameter of 200 - 125 mm

This Thermoduct reducer is equipped with a galvanic metal pipe with an outer casing of thermal insulation material with a 13 mm closed cell structure.

The Thermoduct insulated reducer is suited for air duct systems and Ideal for the supply and extraction of outdoor air. Can be used with an MVHR installation or air source heat pump. The Thermoduct insulated ventilation pipe and accessories are developed and produced by Econox.

Prefab solution

Thermoduct is thÃ© prefab solution for the installation of insulated, silent and energy efficient ventilation. The reducer is prefabricated and insulated which makes the installation much easier. This also reduces installation time and therefore saves costs.

Reduction of heat loss and no condensation

Thermoduct is an air duct system with a high-quality thermal insulating casing. The casing ensures that heat loss is reduced and due to the dense cell structure of 13 mm, water vapor cannot be transferred. Thermoduct regulates temperature differences between the indoor and outdoor air, which makes condensation unlikely to occur.

Easy to install

Thermoduct stands for airtight installation. The Thermoduct products are provided with rubber seals and straps and as a result the Thermoduct fittings achieve air tightness class D or ATC 2. Thanks to the safe connection with rubber sealing and the convenient vapor-tight sealing strips, there is no need for any taping. The inner pipe is also galvanised and therefore easy to clean.

Noise reduction

Thanks to the acoustic properties of the insulating casing, noise is reduced in the ventilation ducts, resulting in a silent ventilation system. This makes it the solution for installations that meet the strict noise requirements of the 2012 Building Decree (max. 30dB(A))).

Brand	Econox
Category	Thermoduct spiral duct transition pieces
GTIN	8719544262080
Manufacturer's item number	11314006
Article number	11314006

Specifications

Category code	214
Connection 1	Insert end
Connection 2	Insert end
Length	44.5 mm
With pre-mounted seal	Yes
Model	Uninsulated duct
Diameter	200 mm
Design form	Centric
Working length connection 1	22.25 mm
Working length connection 2	22.25 mm
Air tightness class according to EN 1751	D
Outer surface protection	Sendzimir galvanised
Embeddable in concrete	No
Inner surface protection	Sendzimir galvanised
Material duct	Steel
Material quality duct	Other
Pressed	Yes
Wall thickness duct	0.5 mm
Connection type connection 2	Round air duct
Production method	Seamless
Outside colour	Grey
Nominal duct diameter, connection 2	125 mm
Length of connection 1	35 mm
Length of connection 2	38 mm
Connection type connection 1	Round air duct
Anti-bacterial treatment	No
Perforated inner wall	No
Fitting reducing piece	No
Duct reducing piece	Yes
Antistatic version	No
Nominal duct diameter, connection 1	200 mm
Diameter 2	125 mm
Type of insulation	Thermoduct insulated 13mm