Item number: 65146079
Pay safe and fast with:
The Maxivent WTW air handling units with heat wheel 1050 m³/h with left vertical hot water coil - RHE 1050 V WOJL is a high-quality, robust, and advanced balanced ventilation unit with heat recovery, specifically designed for offices, medical practices, and small to medium-sized commercial buildings. The air handling unit features a maximum air volume flow of 1460 m³/h and an EN 308 and Eurovent certified heat exchanger. The unit operates with a heat wheel and EC fans and is equipped with a hot water coil that heats the supply air to the desired temperature while helping to prevent frost formation in the heat exchanger. The AHU is designed for floor mounting and can be opened from the left side for maintenance.
The Maxivent WTW air handling units with heat wheel 1050 m³/h with left vertical hot water coil - RHE 1050 V WOJL are developed for small to medium-sized commercial spaces such as offices, meeting rooms, medical practices, retail stores, and educational or healthcare environments. Thanks to the combination of heat recovery, EC fans, and the hot water coil, the unit provides stable and energy-efficient ventilation, even at low outdoor temperatures.
| Brand | Maxivent |
| Category | Maxivent RHE heat recovery wheel - top connection |
| GTIN | 8719544333285 |
| Manufacturer's item number | Maxivent RHE 1050 V WOJL |
| Article number | 78010553 |
| Category code | 36 |
| Housing material | Steel |
| Surface protection housing | Continuously galvanised |
| Air volume, unloaded | 1460 m³/h |
| Supply filter according to ISO 16890-1:2016 | ISO ePM1 |
| Efficiency supply filter according to ISO 16890-1:2016 | 55 % |
| Heat recovery by | Thermal wheel |
| With bypass | No |
| Type of cooling coil | None |
| Type of heating coil | Hot water heat exchanger |
| Change-over system | No |
| With humidifier | No |
| Type of supply fan | Direct |
| Exhaust filter according to ISO 16890-1:2016 | ISO ePM10 |
| Efficiency exhaust filter according to ISO 16890-1:2016 | 50 % |
| Type of exhaust fan | Direct |
| Connection voltage | 400 V |
| Power consumption | 0.355 W |
| With thermal overload protection | Yes |
| Electrical connection | Terminals |
| Suitable for electronic control | Yes |
| Suitable for frequency control | No |
| Suitable for transformer control | No |
| Pole-reversible | No |
| External controller required | No |
| Frost protection circuit | Yes |
| Type of motor | Electronically commutated (EC) |
| Type of speed control | Continuously variable |
| Number of connections suction side | 2 |
| Connection suction side | Rectangular |
| Nominal duct height of suction end | 200 mm |
| Nominal duct width of suction end | 500 mm |
| Connection delivery side | Rectangular |
| Number of connections delivery side | 2 |
| Nominal duct height, delivery side | 200 mm |
| Nominal duct width, delivery side | 500 mm |
| Degree of protection (IP) | IP41 |
| Explosion safety | None |
| Max. air temperature | 40 °C |
| Height | 1099 mm |
| Width | 816 mm |
| Length | 1150 mm |
| Device emplacement | Indoor positioning |