Item number: 65125549
Pay safe and fast with:
The Maxivent WTW air handling units with counterflow heat exchanger 2800 m³/h with hot water coil vertical left - PHE 2800 V WOJL are high-quality, robust, and advanced balanced ventilation units with heat recovery, specifically designed for offices, medical practices, and large commercial buildings. The air handling unit has a maximum airflow of 3575 m³/h and a thermal efficiency of 83%. The unit operates with a counterflow heat exchanger and EC fans and features a hot water coil that heats the supply air to the desired temperature while preventing frost formation in the heat exchanger. The AHU is designed for floor mounting and can be opened on the left side for maintenance.
The Maxivent WTW air handling units with counterflow heat exchanger 2800 m³/h with hot water coil vertical left - PHE 2800 V WOJL are designed for large commercial spaces such as offices, meeting rooms, medical practices, retail stores, and educational or healthcare environments. Thanks to the combination of heat recovery, EC fans, and the hot water coil, the unit delivers stable and energy-efficient ventilation, even at low outdoor temperatures. The integrated controls and summer bypass ensure a comfortable indoor climate throughout the year, both in winter and during warm periods.
| Brand | Maxivent |
| Category | Maxivent PHE counterflow - top connection |
| GTIN | 8719544333162 |
| Manufacturer's item number | Maxivent PHE 2800 V WOJL |
| Article number | 78010541 |
| Category code | 36 |
| Housing material | Steel |
| Surface protection housing | Continuously galvanised |
| Air volume, unloaded | 3575 m³/h |
| Supply filter according to ISO 16890-1:2016 | ISO ePM1 |
| Efficiency supply filter according to ISO 16890-1:2016 | 55 % |
| Heat recovery by | Counter current unit |
| With bypass | Yes |
| Type of cooling coil | None |
| Type of heating coil | Hot water heat exchanger |
| Change-over system | No |
| With humidifier | No |
| Type of supply fan | Direct |
| Exhaust filter according to ISO 16890-1:2016 | ISO ePM10 |
| Efficiency exhaust filter according to ISO 16890-1:2016 | 50 % |
| Type of exhaust fan | Direct |
| Connection voltage | 400 V |
| Power consumption | 1.123 W |
| With thermal overload protection | Yes |
| Electrical connection | Terminals |
| Suitable for electronic control | Yes |
| Suitable for frequency control | No |
| Suitable for transformer control | No |
| Pole-reversible | No |
| External controller required | No |
| Frost protection circuit | Yes |
| Type of motor | Electronically commutated (EC) |
| Type of speed control | Continuously variable |
| Number of connections suction side | 2 |
| Connection suction side | Rectangular |
| Nominal duct height of suction end | 400 mm |
| Nominal duct width of suction end | 600 mm |
| Connection delivery side | Rectangular |
| Number of connections delivery side | 2 |
| Nominal duct height, delivery side | 400 mm |
| Nominal duct width, delivery side | 600 mm |
| Degree of protection (IP) | IP41 |
| Explosion safety | None |
| Max. air temperature | 40 °C |
| Height | 1706 mm |
| Width | 869 mm |
| Length | 2194 mm |
| Device emplacement | Indoor positioning |