-
In stock
Item number: 35016003
Pay safe and fast with:
The DucoBox MVHR Energy Premium is DUCO's latest acquisition, indicating that they have developed the quietest System D in Europe. The DucoBox Energy 570 MVHR has a ventilation capacity of 570m³/h and is equipped with a wireless receiver, a 100% bypass and a constant flow control. This makes it possible for the air flow between the extract and supply side to remain constant should the filters become dirty. The second advantage is the automatic adjustment, an adjustment based on constant pressure saves up to 50% of the time.
DucoBox energy 2-zone system (day and night zone)
The DucoBox Energy Premium with the 2-zone system (types 2Z) offers the possibility to divide the house in a day- and nightzone. This means that ventilation only takes place in that zone. The advantages of this are that less energy is used, the unit runs more quietly and a higher efficiency is possible. Are you using the integrated 2-zone system? Then take into account the naming of the zones. Zone 1 is the sloping side of the DucoBox Energy Premium.
| Type DucoBox Energy Premium | Value |
| Type | 570 2ZS L |
| Discharge capacity | 400 m³/h |
| Supply capacity | Up to 571 m³/h total and up to 360 m³/h per zone By using a 2-zone system as standard, the calculated supply capacity may be reduced to 70% in effective control. |
| Zone control |
2 zone control (2Z) |
| Frost protection | Yes, with additional frost protection (S) |
| Equipped with heater | Yes, for the purpose off frost protection |
| Version | Left, sloping side (L) |
| Summer by-pass | Yes, fully (100% modulating) |
| Article number Duco | 0000-4372 |
On the sloping side, the supply and extract air ducts to the dwelling are connected (ETA and SUP). These are the residential connections, the abbreviations stand for SUP = supply air into the house, ETA = extract air into the house.
The Energy Premium is one of the most advanced WTW's on the market. It is therefore not inconceivable that this Duco WTW can be operated in various ways. .
Control: Integrated Display, Duco RF, Duco Wired, Switch Contact (standard Duco control switches and room sensors). Expandable with Communication Print, the advantages: for operation via smartphone/tablet, ModBus, PWM-IN, PWM-OUT, Switching contact (3x), Ethernet, Micro SD card slot.
Integrated: pressure, temperature, humidity (via optional box sensor), onboard switching contact External: CO2 (via optional room sensor), humidity (via optional room sensor), external switching contact (voltage-free input) (optional).
The scope of supply of the DucoBox Energy Premium
Standard warranty 24 months.
| Brand | Duco |
| Category | All MVHR units |
| GTIN | 5425037153935 |
| Manufacturer's item number | 0000-4467 |
| Article number | 19140157 |
| Category code | 93 |
| Height | 957 mm |
| Depth | 585 mm |
| Nominal duct diameter (min) | 160 mm |
| Nominal duct diameter (max) | 190 mm |
| Suitable for ceiling mounting | No |
| Suitable for wall mounting | Yes |
| Suitable for floor mounting | Yes |
| Max. air volume at 100 Pa | 425 m³/h |
| Max. air volume at 200 Pa | 370 m³/h |
| Electrical connection | Other |
| Type of motor | Electronically commutated (EC) |
| With zone controller | Yes |
| With heating element | Yes |
| Frequency | 50 Hz |
| With wired control unit | No |
| Supporting protocol for Modbus | Yes |
| Suitable for central heating boiler connection | No |
| Type of frost protection | Heating element |
| With internal humidity (RH) sensor | No |
| Efficiency supply filter according to ISO 16890-1:2016 | 65 % |
| Degree of protection (IP) | IP40 |
| Efficiency exhaust filter according to ISO 16890-1:2016 | 65 % |
| Max. air volume at 150 Pa | 400 m³/h |
| Max. air volume at 250 Pa | 345 m³/h |
| Voltage | 230 V |
| With digital display | Yes |
| Suitable for wired control unit | Yes |
| Number of phases | 1 |
| Energy efficiency class according to 1253/2014/EU | A |
| Suitable for zone controller | Yes |
| Suitable for wireless remote control | Yes |
| With bypass | Yes |
| Supply filter according to ISO 16890-1:2016 | ISO Coarse |
| Exhaust filter according to ISO 16890-1:2016 | ISO Coarse |
| With internal carbon dioxide (CO2) sensor | No |
| Weight | 46.023 kg |
| Suitable for (extra) humidity (RH) sensor | Yes |
| Suitable for (extra) carbon dioxide (CO2) sensor | Yes |
| With thermal overload protection | Yes |
| Max. air volume at 300 Pa | 320 m³/h |
| Plug type | Type G |
| Energy label | A+ |
| Connection type | connections links |
| With enthalpy exchanger | No |
| Orientation | Left |
| Width | 740 mm |