Decentralized MVHR HRU wall with Wi-Fi module 60 m³/h - Ø150 - HRU-WALL-WI-150-60

This wireless WTW unit from Alnor is equipped with a Wi-Fi module. The basic parameters of this product are identical to those of the HRU-WALL units and include: a maximum heat recovery of 82%, an airflow rate of 60 m3/h and a low sound power level of 38 dB (A).

Clever design

This Alnor heat recovery unit features multiple elements and has a highly effective design that includes an outer grille with bug mesh, a telescopic duct, an integrated ceramic 'honeycomb' heat exchanger and a removable dust filter. In terms of use for single-room reat recovery ventilation, these Alnor WTW units are most effective when mounted in two opposite rooms and fall into the same group. When you synchronize two units for alternating operation (one unit supplies air and the other extracts air), they perform optimally. Of course, you can set this up completely wirelessly (Wi-Fi)!

Using the app

You can pair and control devices in various ways. Thanks to the Wi-Fi module, you can connect the HR unit to a wireless network and control it via an official Alnor app, such as the WallAIR. Here you can assign two or more heat recovery units to a group and control them together. If desired, you can create multiple groups so that you can control all the heat recovery units in a building with one application. You can also view values from the built-in temperature sensor and relative humidity sensor on the app. With an Android or iOs phone/tablet, you can operate the app quickly and easily. Among other things, you can adjust airflow speeds and directions (heat recovery mode or supply/exhaust mode). Furthermore, you can set timers, while it is also possible to read temperature and/or relative humidity. You can always read the latest figures in terms of recently measured humidity in the app.