Boat and ship ventilation
Good ventilation on a boat or ship is important in (closed) interior spaces. In both small inland boats and large cargo ships, oxygen and a fresh air flow cannot be missed.
With the right ventilation you can prevent the adverse effects of, for example:
- Humidity on board, such as mold growth;
- Harmful emissions;
- Air that is too hot.
There are various types of fans suitable for the extraction and supply of air in boats. Contact us for advice, order directly or request a quote.
Marine ventilation categories
Ventilating a boat or ship
The technical areas of ships need to be properly ventilated, but kitchens and toilet areas on board also need to be properly ventilated. Moisture, gases or other harmful substances can occur in these areas. Ventilation tubes and ducts are important to get the fresh air into the right rooms. Ventilation grills are placed to close off ventilation channels or to provide natural ventilation on board.
Watertight ventilation of ships
Ventilation grilles on board should not be placed too close to water because water is harmful to the fans and machinery. There is, however, a way to ventilate as watertight as possible on a ship. With water repelling stainless steel ventilation grids rust is prevented. By placing special drop catchers behind the ventilation grills, water drops are caught and not sucked in by the fan.
Engine room ventilation
In a container ship or on large cargo ships there are technical areas and machine rooms where temperatures can rise because of the engines. Dangerous gases and substances can also be suspended in the air in these rooms. In order to improve the air quality and meet the temperature requirements, it is important that these areas are properly ventilated. This can be done, for example, by using an air handling unit with a cooler.
Marine ventilation without power
Is there no power source on board or do you prefer to ventilate without power? Then a wind-driven fan can be the solution for ventilating your boat. In fresh water, wind-driven fans can easily be used. However, for boating on salt water we do not recommend this. Because of the salty air, other materials are needed. For more information and advice please contact us, we are happy to help.
Boat ventilation in the winter
In the winter months many boats are stored in a garage. Yet it is important to keep ventilating. Otherwise the air inside will become damp and mold and unpleasant odors can develop. Mold is not only bad for your health, but also for the boat. The best way to prevent mold is to install vents in doors and hatches so air can circulate continuously.
Order marine ventilation with a business account?
We want to offer our business customers the possibility to order professionally. Register as a business customer and take advantage of special conditions and even more benefits, such as the ability to order by invoice. Of course it is also possible to order without a business account. For information and registration, see the page Business ordering on account.
Frequently asked questions about boat and ship ventilation
Several fans are suitable for this purpose. Look in the category marine ventilators. If there is no power available on board, it is possible to ventilate via natural ventilation. This is created with air vents or stainless steel vents or wind-driven fans on your boat.
To prevent overheating of the engine, it is important that a machine room on, for example, large container ships or cargo boats, is properly ventilated and cooled. Air handling units with a cooler, among other things, are suitable for this purpose.
Some grilles are made of stainless steel and therefore water resistant and splash proof. With the right air velocity (< 3m/s) there is little chance of water being drawn in through an exterior wall grille. Drip catchers placed behind the ventilation grid ensure that no water gets into the ventilation duct or fan.
A fan in the technical room of a ship is essential. It prevents the engine from overheating and sucks harmful gases from the air. To prevent the adverse effects of mould, it is important that the damp air from the boat is ventilated using stainless steel ventilation grilles.
Request your quote here. Usually you will receive a tailor-made quote as soon as possible.
As a business customer you can buy your order on account and pay afterwards. This is subject to a number of conditions. Your company, association, foundation or institution exists at least 1 year. Then we do a credit check. If this is approved you can start ordering.
Do you have a question that is not listed here? Please contact [email protected] and we will answer your question as soon as possible.
Can we help you with anything else?
At Ventilationland, we think it is important that we can always be reached and answer your questions as quickly as possible. Therefore, you can reach us in several ways, including via chat or WhatsApp. We are happy to help!