Decentralised MVHR unit with pull cord and plug
Install this low-noise MVHR unit for a constant supply of fresh air with minimal heat loss. The system provides optimal efficient ventilation of a single room and can be placed in any room. It is an easy solution if you want a MVHR system without having to install a whole new duct system in the house. They are therefore very suitable for existing buildings. Only one duct is needed.
The air supply and exhaust take place in the same tube and are reversed every 70 seconds. The heat of the polluted, outflowing air is collected in the (ceramic) heat exchanger. Subsequently the fresh, incoming air is heated by this.
This MVHR unit is connected by means of a plug. The plug has a switch on it that allows the unit to be switched on and off (after a few seconds you will hear the fan start).
In addition, this unit is equipped with a pull cord with which the speed of the fan can be determined (position I or II). The productivity of the MVHR unit is 20 m3/h in position I and 30 m3/h in position II.
We recommend cleaning the filters with water once every 3 months. The regenerator should be cleaned 1x per year with a hoover at the lowest setting.
The system is designed for continuous use, 365 days a year, 24 hours a day.