Orcon HRC-570 Smartcomfort MVHR with 2-zone control - 570m³/h

The new HRC SmartComfort ensures demand-controlled ventilation in two zones based on a CO2 air quality measurement. In the living room and master bedroom, CO2 sensors are placed which communicate wirelessly with the zone valves. As a result, exactly the requested air flow is provided at any time of day. The system is whisper quiet and has a maximum flow rate of 570 m³/h at 200 Pa. The heat is recovered with an efficiency of more than 99% and a built-in pre-heater comes as standard.

Capacity 2-zone system

The flow rate of 570 m3/h, as stated above, is calculated by taking 70% of the maximum continuous flow rate (the capacity of the MVHR unit at maximum output) of 405 m3/h and multiplying it by 2, for the number of zones the unit can ventilate separately. 405 x 0.7 x 2 = 567 (with margin of ~3 m3/h due to never fully closing the smart valves). Since you are using a night and day zone and generally there is no need to ventilate all rooms continuously throughout the day, the smart MVHR unit can therefore, despite continuously ventilating a maximum of 405 m3/h, be used for houses/premises of which the ventilation calculation is a maximum of 570 m3/h.

Installation-friendly

The wireless communication between the sensors, the device, and the valves is a great advantage. As a result, they can also be installed further down the ductwork and without any wires needed to be pulled or connected. In addition, the valves are equipped with fully transparent housings so that the valve position can be easily seen, thus simplifying installation and maintenance. This makes the system very flexible, installation-friendly and easy to use.

The advantages of the new HRC

Just like the HRC EcoMax and MaxComfort, this latest system has the highest thermal efficiency in the market, highest A+ energy label, built-in humidity sensor, low noise level and modulating 100% bypass. Next to that, up to 20 different sensors can be applied, including the CO2 control sensor and CO2 room sensor.

Features

• Includes rim earth plug
• Includes wall bracket
• Standard with humidity sensor
• Suitable for RF and/or wired control
• Suitable for 2 zone control
• Includes pre-heater