- 117 items in stock
Recommended price
£89.64
-25%
£67.24
Item number: 19130111
-30%
Complete your order
- 9 items in stock
RRP £2,919.24
£2,043.47
-30%
Orcon HRC 500 EcoMax 500m³/h at 150Pa
The new HRC 500 EcoMax is the new MVHR unit from Orcon and replaces the HRC BRPH-15. The HRC EcoMax is up to 60% more energy efficient than its predecessor, with a thermal efficiency of 99.7%! The unit has a maximum flow rate of 500 m³/h at 150Pa and is very quiet.
TIP: The MVHR unit can be set to 500m³/h at 200 Pa using the dip switches.
Orcon's MVHR unit is one of the smartest heat recovery units on the market. Thanks to the many integrated sensors, the device measures the living conditions precisely and can anticipate them. This demand-controlled ventilation prevents unnecessary energy consumption. The HRC 500 comes with the following integrated sensors:
- 3 humidity sensors
- 8 temperature sensors
- 2 anemometer sensors
Thanks to the 13 built-in sensors, the flow can be balanced with an accuracy of 1%. The sensors also ensure even better regulation in different demand-controlled scenarios such as bypass, frost, shower and cooking programs. In addition, up to 20 additional RF sensors or RF controls can be connected to the unit.
The Orcon 500 EcoMax MVHR is exceptionally easy to install. The unit is suitable for both left and right assembly by mounting the control, filters and front plate on the other side of the unit. In addition, the ventilation ducts can be connected to either the side and or the top. The device is supplied without plug.
Left and right version
There are two ways of connecting the Orcon HRC EcoMax. The unit comes in the "left" version by default. The dwelling connections are on the left, and the connections to the outside are on the right. But this can be easily adjusted: if the front and back are detached, the unit can be turned over! For further information, consult the installation manual.
Other properties of the Orcon HRC 500 Healthline EcoMax:- Latest EBM-papst 3D scrolls with Radical impellers and intelligent anemometer technology
- With humidity sensor as standard
- Best balancing technique accurate to 1%
- Highly insulating EPP housing
- Filter indicator
| Brand | Orcon |
| Category | Heat recovery choice aid |
| GTIN | 8718403863314 |
| Manufacturer's item number | 22000100 |
| Article number | 19220032 |
Specifications
| Connection diameter | 180 mm |
| Connection | Male |
| Connection 0-10V | No |
| Airflow bij 150 Pa | 500 m³/h |
| Airflow at 200 Pa | 500 m³/h |
| App controllable | No |
| Breedte | 760 mm |
| Cos. phi according to EPN standard | 0,56 |
| Roof connection top | Yes |
| Roof connection side | Yes |
| Depth | 600 mm |
| Digital display | Yes |
| Home automation connection | No |
| Wireless control | Yes |
| Enthalpy changer | No |
| Filter class | EU 4 (G4) |
| Direct current motor | Yes |
| Suitable for boiler connection | No |
| Height | 888 mm |
| Flow rate high at 100 Pa | 500 m³/h |
| Flow rate high at 150 Pa | 500 m³/h |
| Flow rate high at 200 Pa | 500 m³/h |
| Housing material | Plastic |
| With VOC-sensor | No |
| With bypass | Yes |
| With built-in CO2-sensor | No |
| With built-in temperature sensor | Yes |
| With thermal protection | Yes |
| With heating battery | No |
| With humidity sensor | Yes |
| Mounting for | Assembly chair |
| Mounting for | Wall |
| Power consumption according to EPN standard | 0.068 |
| Ceiling mounting | No |
| Plug | Peripheral ground |
| Type of speed control | Other |
| Floor mounting | Yes |
| Wall mounting | Yes |
| House connection top | Yes |
| House connection bottom | No |
| House connection left | Yes |
| House connection right | Yes |
| Zone control | 1 Zone |
Accessoires
- 12 items in stock
Recommended price
£278.64
-25%
£208.98
Item number: 19130113
- 226 items in stock
- 8000 units expected on 29-04-2024
- STAINLESS STEEL
- Adjustable closure
- high-quality finish prevents tube damage
£1.73
Item number: 20051053
- 92 units expected on 10-06-2024
- Kern van non-woven polypropyleen
- Aluminium
- Fits seamlessly on pipes and fittings
£26.29
Item number: 72621018
- 22 items in stock
- Thermal insulation
- Perfect for WTW
- Suitable as silencer for heat recovery units
Recommended price
£65.74
-25%
£49.31
Item number: 72600018
- 12 items in stock
- Acoustically insulated
- Prevents condensation
- Ideal for quiet ventilation
Recommended price
£55.12
-25%
£41.34
Item number: 72500518
- 5 items in stock
£95.04
Item number: 19220023
- 5 items in stock
£7.72
Item number: 19220026
- 39 items in stock
£29.16
Item number: 19220024
Reviews
Blogs
See all blogs
We are frequently asked how one should maintain a mechanical fan or heat recovery system. This is a very good question, because for maximum benefit from your ventilation system, proper maintenance is a must. This does not require intensive maintenance but regular cleaning.
Winter time has already arrived and the new lockdown measures have been introduced, which means we will spend much more time at home again. We often make the mistake of opening the heating in cold weather and closing the windows and grilles in the home, this causes a major deterioration in indoor air quality. Are you curious about how you can ensure that you achieve a healthy indoor climate in your own home in winter? Read on quickly!
The abbreviation MVHR stands for heat recovery and is a method of ventilation in which as little heat as possible is lost. With MVHR ventilation, the used, warm air is simply removed and its heat is transferred to the fresh, cold air that flows through the ventilation system into the house. An MVHR unit keeps the air flows in your home balanced, which is why it is also known as balanced ventilation. The system is also known as 'ventilation system D'.
The lack of fresh air in a room is very unhealthy. Among other things, it leads to physical complaints that are very quickly noticeable. This blog lists the complaints caused by poor ventilation and gives tips on how to prevent them.
Related products
- 7 items in stock
- Humidifier
- Legionella-safe
- For all WTWs
£1,370.94
Item number: 19221001
