- 43 items in stock
- 166 units expected on 30-04-2024
- 2 items in stock
HomEvap MVRH cooler
The HomEvap cooler is suitable for any MVHR and is completely Legionella safe. The HomEvap was developed to create a pleasantly cool indoor climate. It has succeeded!
The cooler (HEPC) can be connected to any heat recovery system, or to the return air supply in the home, by means of connectors. The cooler can be easily connected to your water supply and drainage. In addition, the HomEvap always includes Hedis wireless control which you can use to configure the cooler and operate it fully automatically.
Please note!
This HomEvap MVHR humidifier only works via an external control (a 0-10V signal or Modbus/BACnet protocol) or an on/off contact. With this type of humidifier, there is no HEDIS control panel included and it cannot be expanded at a later date with a wireless HEDIS control.
Operating the HomEvap MVHR cooler
Via the return air (MVHR extraction on the living side), the air passes through a humidified matrix and legionella filter. This cools the air down to very close to the wet bulb temperature of this air. For example, 29C/30% is cooled to 20C/75% — an efficiency of as much as 80%. The heat exchanger is now a cold exchanger. This achieves quiet, safe and energy efficient cooling of the air in your home.
Advantages of the HomEvap MVHR cooler
- Suitable for external control
- Can be connected directly to any MVHR system
- Proven results for 10 years
- Fully automatic operation
- Low running costs
Tip: below you can see the most frequently asked questions about the HomEvap MVHR cooler.
If you have an order of 3 or more products and an order value of at least £1000 (ex. VAT), request your quote here.
Brand | HomEvap |
Category | HomEvap MVHR air humidifier |
GTIN | 8719326331867 |
Manufacturer's item number | HEPC-ZC |
Article number | 19221012 |
Specifications
Connection | Male |
Breedte | 350 mm |
Plug | 3-core powercable |
Suitable for wireless control | No |
Suitable for cooling | Yes |
Suitable for air humidification | No |
Suitable for humidification and cooling | No |
Height | 350 mm |
Duct connection | 150-200 |
Length | 258 mm |
Coupling cable length | 1000 mm |
Length of power cord | 1000 mm |
Housing material | Polypropyleen (EPP) |
Max. cooling capacity | 2275 |
Max. air volume | 600 m³/h |
Max. power consumption | 20 Watt |
Max. water supply | 3 bar |
With wireless control | No |
With temperature sensor | Yes |
With humidity sensor | Yes |
Min. capital and reserves | 8 Watt |
Min. watertoevoer | 1.5 bar |
Motortype | Alternating current |
For connection to MVHR | Yes |
Water disposal | 15 mm PVC sla |