The air handling unit ROTO V is a heat recovery unit with Rotary heat exchanger.The efficiency of the rotary exchanger in the ROTO V-Series is above 80%. The air handling unitadditionally restores up to 60% of the humidity in a room. In addition, in winter, too dry an indoor air is counteracted and thus a healthy indoor climate is achieved. ROTO V air handling units equipped as standard with hot water heater. The ROTO-V has a vertical blowing direction
Energy Efficiency
The highly efficient EC fans achieve a total efficiency of over 60%, well above the IE4 efficiency class.
High-quality execution
De air handling unit with rotary heat exchanger is made of corrosion-resistant aluminum and is resistant to ice build-up. The frameless two-shell housing consists of high quality galvanized sheet steel.Between the two shells there are insulation panels with a thickness of 50mm. The unit is equipped with an underframe.
Control
All air handling units are equipped with a microprocessor control as standard, wired and tested at Ruck's factory All air handling units are equipped with a microprocessor control as standard, wired and tested at Ruck's factory. The ROTO V-Series is additionally supplied with sensors and actuators. This allows for easy Plug and Play installation. All cabinets in the ROTO V series have a constant volume. Desired air volumes can be regulated via the control unit. In addition, automatic mass flow correction is integrated into the control. The air handling unit is expandable with further control options such as CO2 control, humidity control and a Modbus RTU interface. This ensures flexible application possibilities.
Application
The ROTO V air handling units are very suitable for ventilating for example offices, public areas and meeting rooms.
Hygiene
The ROTO V series contains M5 and F7 filters and provide hygienic filtration of exhaust air and outside air. In addition, there is a condensate pan on the inlet and outlet side. Cleaning The air handling unit is very easy due to the smooth inside of the unit. In addition, cables are easily accessible because they are located outside the airflow.
2-year warranty
Click here to go to the Ruck website. Here you will find interactive diagrams in which you can easily find the pressure, power usage, efficiency, noise levels and rounds per minute for a certain air flow.
It is possible to request a quote for orders with a minimum of 3 products and an ordervalue of £1000 (ex. VAT) or higher. This can be done via our request a quote page.
Brand | Ruck ventilatoren GmbH |
Category | Vertical heat wheel |
GTIN | 4061199027939 |
Manufacturer's item number | 142270 |
Article number | 65142270 |
Specifications
Number of phases | 3~N |
Type of motor control | 0-10V |
Gewicht | 201 kg |
IP Complete Unit | IP41 |
IP Motor | IP54 |
Insulation Class Motor | F |
Cooling battery | None |
Max. Operating Current | 2.8 A |
Max. pressure | 1020 Pa |
Max. Air Volume | 1460 m³/h |
Max. Current Consumption | 2.8 A |
Max. power consumption | 353 W |
Max. Static Efficiency | 31 % |
Max. allowed Medium Temperature | 40 °C |
Max. allowed Medium Temperature at Rated Current | 40 °C |
Max. allowed Ambient Temperature | 40 °C |
Max. allowed Ambient Temperature at Rated Current | 40 °C |
Max. number of revolutions | 4600 1/min |
Max. Total Efficiency | 31.2 % |
Min. allowed Voltage | 230 V |
Min. Operating Temperature | -20 °C |
Motor Protection | TEC |
Motor type | EC |
Nominal frequency | 50 Hz |
Nominal power consumption | 758 W |
Nominal voltage | 400 V |
Nominal current | 2.6 A |
Rated Speed | 4230 1/min |
Drafting | Inside positioning |
Direction of blow out | Vertical |
Verwarmingsbatterij | Hot water |
Heat exchanger | Heat wheel |