|Brand||Ruck® ventilatoren GmbH|
|Category||Ruck exhaust air handling units (SL)|
|Unit||per piece |
Max. Air Volume
The maximum air volume that the fan can displace, often expressed in m3/h.
|Max. Air Volume||5110 m³/h|
The rated voltage of the unit expressed in Hertz (Hz).
|Nominal frequency||50 Hz|
The connection voltage of the unit expressed in Volt (V).
|Nominal voltage||230 V|
Nominal power consumption
The power consumption of the unit expressed in Watts (W).
|Nominal power consumption||726 W|
Max. Operating Current
The maximum electrical current of the unit expressed in Amps (A).
|Max. Operating Current||3.34 A|
Number of phases
The number of phases to which the appliance is to be connected, distinguishable into; 1 phase for voltage 220/230V and 3 phase for voltage 380/400V
|Number of phases||1~|
The type of motor used to run the fan.
Type of motor control
Type of connection with which the motor can be controlled can be expressed in; 0-10V connection, V (voltage controlled), f (frequency controlled), 1-2-3 (3-step switch) or 1-2-3-4 (4-step switch).
|Type of motor control||0-10V|
Type of temperature protection of the motor expressed in; TA- for automatic reset after overblast. TM- for no automatic reset. TEC for internal electronic temperature monitoring.
Stored electrical charge in the capacitor expressed in Farat (F).
|Capacitor µ||0 µF|
The voltage across the capacitor expressed in Volts (V).
|Capacitor Voltage||0 V|
Insulation Class Motor
Degree of insulation of the motor in the fan expressed in B (up to 130°C), F (up to 155°C) or H (up to 180°C).
|Insulation Class Motor||F|
The protection class of the motor expressed in International Protection Rating (IP class).
Min. Operating Temperature
The minimum temperature at which the fan operates. Below this temperature, the fan will no longer operate correctly and will eventually fail.
|Min. Operating Temperature||-25 °C|
The rated current of the unit expressed in Amps (A).
|Nominal current||3.18 A|
The maximum number of revolutions a motor can make without load per minute (per/min).
|Rated Speed||2440 1/min|
Max. Static Efficiency
The maximum static efficiency of the motor at constant pressure expressed in percent (%).
|Max. Static Efficiency||53.7 %|
Max. Total Efficiency
The maximum total efficiency of the motor expressed in percent (%).
|Max. Total Efficiency||57.1 %|
Max. power consumption
Maximum power of the engine expressed in watts (W).
|Max. power consumption||726 W|
Max. Current Consumption
Maximum current of the engine expressed in Amps (A).
|Max. Current Consumption||3.34 A|
Max. number of revolutions
The maximum number of revolutions a motor can make at load per minute (per/min).
|Max. number of revolutions||2585 1/min|
The maximum (total) pressure at which the engine still operates correctly expressed in Pascal (Pa).
|Max. pressure||840 PA|
Max. allowed Ambient Temperature at Rated Current
The maximum ambient temperature at which the engine operates correctly at rated current is expressed in degrees Celsius (°C).
|Max. allowed Ambient Temperature at Rated Current||40 °C|
Max. allowed Medium Temperature at Rated Current
The maximum temperature of the transported air at which the engine at rated current is still operating correctly, expressed in degrees Celsius (°C).
|Max. allowed Medium Temperature at Rated Current||40 °C|
Max. allowed Ambient Temperature
The maximum ambient temperature at which the engine is still operating correctly expressed in degrees Celsius (°C).
|Max. allowed Ambient Temperature||40 °C|
Max. allowed Medium Temperature
The maximum temperature of the transported air at which the engine is still operating correctly, expressed in degrees Celsius (°C).
|Max. allowed Medium Temperature ||40 °C|