|Brand||Ruck® ventilatoren GmbH|
|Category||Ruck ETA K...F up to 2560 m³/h|
|Unit||per piece |
Max. Air Volume
The maximum air volume that the fan can displace, often expressed in m3/h.
|Max. Air Volume||1395 m³/h|
The heat exchanger used to run the fan.
The heating battery used in the fan.
|Heating battery||Hot water|
The cooling battery used in the fan.
Location where the unit can be placed (indoor or outdoor installation).
The rated voltage of the unit expressed in Hertz (Hz).
|Nominal frequency||50 Hz|
The connection voltage of the unit expressed in Volt (V).
|Nominal voltage||230 V|
Nominal power consumption
The power consumption of the unit expressed in Watts (W).
|Nominal power consumption||587 W|
Max. Operating Current
The maximum electrical current of the unit expressed in Amps (A).
|Max. Operating Current||4.04 A|
Number of phases
The number of phases to which the appliance is to be connected, distinguishable into; 1 phase for voltage 220/230V and 3 phase for voltage 380/400V
|Number of phases||1~|
The type of motor used to run the fan.
Type of motor control
Type of connection with which the motor can be controlled can be expressed in; 0-10V connection, V (voltage controlled), f (frequency controlled), 1-2-3 (3-step switch) or 1-2-3-4 (4-step switch).
|Type of motor control||0-10V|
Type of temperature protection of the motor expressed in; TA- for automatic reset after overblast. TM- for no automatic reset. TEC for internal electronic temperature monitoring.
Stored electrical charge in the capacitor expressed in Farat (F).
|Capacitor µ||0 µF|
The voltage across the capacitor expressed in Volts (V).
|Capacitor Voltage||0 V|
Insulation Class Motor
Degree of insulation of the motor in the fan expressed in B (up to 130°C), F (up to 155°C) or H (up to 180°C).
|Insulation Class Motor||F|
The protection class of the motor expressed in International Protection Rating (IP class).
IP Complete Unit
The protection class of the complete fan expressed in International Protection Rating (IP class).
|IP Complete Unit||IPX4|
Min. Operating Temperature
The minimum temperature at which the fan operates. Below this temperature, the fan will no longer operate correctly and will eventually fail.
|Min. Operating Temperature||-30 °C|
The rated current of the unit expressed in Amps (A).
|Nominal current||1.89 A|
The maximum number of revolutions a motor can make without load per minute (per/min).
|Rated Speed||3120 1/min|
Max. Static Efficiency
The maximum static efficiency of the motor at constant pressure expressed in percent (%).
|Max. Static Efficiency||38.1 %|
Max. Total Efficiency
The maximum total efficiency of the motor expressed in percent (%).
|Max. Total Efficiency||38.2 %|
Max. power consumption
Maximum power of the engine expressed in watts (W).
|Max. power consumption||283 W|
Max. Current Consumption
Maximum current of the engine expressed in Amps (A).
|Max. Current Consumption||1.98 A|
Max. number of revolutions
The maximum number of revolutions a motor can make at load per minute (per/min).
|Max. number of revolutions||3340 1/min|
The maximum (total) pressure at which the engine still operates correctly expressed in Pascal (Pa).
|Max. pressure||810 PA|
Max. allowed Ambient Temperature at Rated Current
The maximum ambient temperature at which the engine operates correctly at rated current is expressed in degrees Celsius (°C).
|Max. allowed Ambient Temperature at Rated Current||40 °C|
Max. allowed Medium Temperature at Rated Current
The maximum temperature of the transported air at which the engine at rated current is still operating correctly, expressed in degrees Celsius (°C).
|Max. allowed Medium Temperature at Rated Current||40 °C|
Max. allowed Ambient Temperature
The maximum ambient temperature at which the engine is still operating correctly expressed in degrees Celsius (°C).
|Max. allowed Ambient Temperature||40 °C|
Max. allowed Medium Temperature
The maximum temperature of the transported air at which the engine is still operating correctly, expressed in degrees Celsius (°C).
|Max. allowed Medium Temperature ||40 °C|
Min. allowed Voltage
The minimum voltage for operation of the engine expressed in Volts (V).
|Min. allowed Voltage||230 V|
The net weight of the fan.