Cold shrink sleeve 50mm
This shrink sleeve is an elastic, self-adhesive, cold-workable sealing tape made of synoptic rubber
The tapes, specially designed for sealing round and oval ducts, have a good initial adhesion and, depending on temperature and humidity, adhere within 24 hours. Particularly on galvanised material or aluminium, an excellent and durable adhesion is achieved after application. For a good result the substrate must be well dry moisture may not be trapped between tape and substrate. To facilitate the application of the tape, it is recommended to stretch the tape a little (5%). It is important to press the tape well during and after application so that there is contact between tape and substrate in all places (especially in cold weather!). The tape will have reached its maximum adhesion after 24 hours. The substrate must be clean and moisture-free. Remove dust, rust or other loose parts. Apply the tape directly to the top of the duct after removing the release liner and press it firmly onto the duct (watch out for trapped air). Finish applying again at the top of the duct. Ensure a minimum overlap of 100mm. Minimum processing temperature is +5°C. The tape must be stored dry. Recommended storage temperature is between +5°C and +35°C. Do not use this tape for outdoor use.
For further information please refer to the technical sheet.