Sort:
Relevance
Newest first
Oldest first
Alphabetically
Price increasing
Price decreasing
Product code
Sort:
Relevance
Newest first
Oldest first
Alphabetically
Price increasing
Price decreasing
Product code
Filter
What are cone filters?
Conical filters are filters with a conical shape that you can place on the exhaust valve. These filters make sure that no dirt gets into the duct and into the motor of your ventilator. Therefore, they are also called valve filters or channel filters. This way, it is very easy and less time-consuming to keep the ventilation system clean. Replace these filters at least every year for optimal operation of the filters and the ventilation system, also think about cleaning the valves . Can't find the right filter? Then please contact us.
How do I install the cone filter?
Installing a cone filter is very easy. Take the valve out of the housing and mark the position on the inside of the valve with a waterproof pen. Valves are often set in a certain way; it is important that they remain in the same position for optimum system operation. We recommend that you clean the valve thoroughly at this point. Then slide the valve filter over the back of the valve. After this, replace the valve with filter in the ventilation duct.
Nieuwe regelgeving WTW-filters: ISO16890
Sinds augustus 2018 is de filternorm veranderd. De kwaliteit van de filters wordt niet meer aangeduid met G3, M5 of F7 maar met de nieuwe ISO16890 normering. Met deze nieuwe norm kan de kwaliteit van WTW-filters vele malen beter worden aangeduid en dit levert dus ook meer duidelijkheid op voor de klant. In de nieuwe regelgeving worden de volgende waardes per filter aangegeven:
ISO Coarse - percentage van grof stof dat wordt tegengehouden door de filter
ISO ePM1 - percentage van fijnstof ( < 1 µm ) dat de filter tegenhoudt
ISO ePM2,5 - percentage van fijnstof ( < 2,5 µm ) dat de filter tegenhoudt
ISO ePM10 - percentage van fijnstof ( < 10 µm ) dat de filter tegenhoudt
Vergelijken oude en nieuw norm WTW filters
Bij WTW-filters wordt ook nog vaak de oude regelgeving gebruikt en daarom is het handig om deze normeringen te kunnen vergelijken. In onderstaande tabel hebben wij de termen tegenover elkaar gezet, om zo een beter beeld te geven van de verschillende filterklasses. Let op: dit is een schatting en de waardes kunnen licht afwijken.
Filterklasse
ISO Coarse
ISO ePM10
ISO ePM2,5
ISO ePM1
G3
> 45 %
-
-
-
G4
> 90 %
-
-
-
M5
> 95 %
> 50 %
-
-
M6
> 95 %
> 60 %
50 - 60 %
-
F7
> 95 %
> 85 %
65 - 80 %
50 - 65 %
F8
> 95 %
> 90 %
> 80 %
65 - 80 %
F9
> 95 %
> 95 %
> 95 %
> 80 %